TH-ICH-800_Tủ môi trường nhiệt độ, độ ẩm 760 lít
Model: TH-ICH-800
Code: AAHC1012K
Hãng sản xuất: JEIOTECH – Hàn Quốc
Xuất xứ: Hàn Quốc
1. Tính năng kỹ thuật:
Tính năng an toàn:
- Completed photostability test alarm.
- Built in door lock.
- Automatic shut off after overheat alarm.
- Low and empty water level alarm.
- Power supply leakage breaker.
- Over current protection.
- Overheat protection.
- Door open alarm.
Tính năng vận hành:
- Microprocess PID control / Auto-tuning / Calibration.
- User friendly LCD controller.
§ Set value and present value are clearly visible together on display.
§ Operating progression visible in graph mode allow for direct data interpretation.
§ Temperature and other operating parameters recorded with use of an optional recorder. (optional)
- Sufficient programmable control support.
Description
|
TH-ICH
|
Programmable Pattern Capacity
|
10
|
Pattern Repeat Time
|
999
|
Max. Segments per a Pattern
|
100
|
Available Max. Segments*
|
10
|
Programmable Process Time per a Segment
|
0 to 99 hr 59 min
|
* Even though the max. segments per a pattern are 100, available total segments are up to 300 not 3000,
so you need to arrange the number of segment an patterns properly
so you need to arrange the number of segment an patterns properly
- Computer interface:
- RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
- Program patterns are simple to set with the use of our software.
- Storage of program information, backup of value settings / recovery, and temperature values.
- RS-232C port as standard offer.
Tính năng cấu trúc:
- Two different sized models available to suit any users’ needs
- Rapid humidity control is achieved by adapting the humidification tank interior to the chamber.
- Corrosion resistance stainless steel chamber and electric polished humidification tank.
- Air-tight door closure with perfect sealed packing.
§ Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
- Cable port for external probes or wires.
§ 50mm diameter cable port comes standard on the left side of the unit. Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)
- Inner glass door with entry ports for handling samples without affecting inner chamber temperature and humidity. (optional)
- Casters for easy mobility during installation or relocation.
Features for Stability Test ICH Guideline Q1A (R2):
- Operating progression visible through graph mode for better data analyzation.
- Cyclic defrost system, designed to work excellently for the long period stability test operation.
(* Temperature and humidity changes may occur during automatic defrost.)
- Maintenance of water supply are easily performed with a front water tank.
§ Water level check indicated by water level bar in the tank.
- Water supply during operation is also available for long term test purposes.
- Direct water system provides user great convenience when performing long-term test.(optional)
Features for Photostability Test ICH GuidelineQ1B (Option 2):
- Built in UV and fluorescent lamps for uniformed luminescence.
- Equipped with movable UV and VIS sensors.
- Independent lamp controller.
§ An indicator for Total usage time of UV and fluorescent lamps.
- Convenient set function of cumulative dosage and lamp Off.
1. Thông số kỹ thuật:
Model
|
TH-ICH-300
|
TH-ICH-800
| ||
Chamber Volume (L / cu ft)
|
300 / 10.6
|
760 / 26.8
| ||
Controller
|
PID control (LCD Type)
| |||
Temperature 1)
|
Range
|
without Humidity (℃ /oF)
|
-5 to 85 / 23 to 185 without Light
| |
0 to 85 / 32 to 185 with Light
| ||||
with Humidity (℃ / oF)
|
+15 to 85 / 59 to185 with Light
| |||
Fluctuation 1) (±℃ / oF) at 40℃ / 60%RH
|
0.3 / 0.55
|
0.3 / 0.55
| ||
Variation 1) (±℃ / oF) at 40℃ / 60%RH
|
0.5 / 0.9
|
0.7 / 1.3
| ||
Humidity
|
Range (%RH)
|
FULL RANGE : 20 to 85
40 to 80 at 15℃ (59oF) 30 to 85 at 30℃ (86oF) 20 to 85 at 50℃ to 85℃ (122oF to 185oF) | ||
Fluctuation 2) (±%RH) at 60%RH / 40℃
|
3
| |||
Variation 2) (±%RH) at 60%RH / 40℃
|
5
| |||
Light Source
(ICH Q1B option 2) |
Cool White 3)
|
6,000 lux
|
6,500 lux
| |
Ultraviolet-A 3)
|
4.5 W/㎡
|
5 W/㎡
| ||
Light Uniformity
|
VIS. : ±10% UVA : ±15%
|
VIS. : ±15% UVA : ±15%
| ||
Typical Time Required to Reach ICH Recommendation of 1.2 million lux-hr
|
≒ 200Hr
|
≒ 184Hr
| ||
Typical Time Required to Reach ICH Recommendation of 200 W-hr/m2
|
≒ 50Hr
|
≒ 40Hr
| ||
Time
|
Heating 4)
|
25min (20℃ → 85℃)
|
30min (20℃ → 85℃)
| |
Cooling 4)
|
35min (20℃ → -5℃)
|
40min (20℃ → -5℃)
| ||
Refrigeration
|
System
|
Air - cooled
| ||
Refrigerant
|
R- 404A
| |||
Capacity (W)
|
250
|
470
| ||
Cooler
|
Copper plate fin cooler
| |||
Heater
|
Material
|
Ni-Cr Wire Heater / SUS Tube Heater
| ||
Drying Bulb (W)
|
1500
|
2300
| ||
Humidity Bulb (W)
|
1200
|
2000
| ||
Sensor
|
Temperature
|
Pt 100
| ||
Humidity
|
Electronic sensor (Free of drying a wet pack and good response time)
| |||
Air Flow
|
2 set of sirocco fan (2×60 W) : Vertical type
| |||
Material
|
Internal
|
SUS #304 (2B polish)
| ||
External
|
SUS #304 (Hairline finish) & Steel, 2t, Double painted & baked
| |||
Insulation
|
Polyurethane (70mm / 2.76")
| |||
Door
|
EPDM Sheet
| |||
Operating Temperature
|
18℃ to 30℃ / 64.4oF to 56oF, 85%RH (Non-corrosive and pure place)
| |||
Water Tank
|
Capacity (L / cu ft)
|
15 / 0.53
| ||
Water Quality
|
pH6.2 ~ 7.2, Electrical conductivity 20㎲ / cm to below
| |||
Interface Port
|
Basically RS-232C, [RS-485 : optional]
| |||
Cable Port
|
Basically one hole provided / Ø 50mm (2"),Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2")
| |||
Quantity of Wire Shelves (included / max.)
|
2 / 8
|
2 / 17
| ||
Distance of between Shelves (mm / inch)
|
60 /2.4
| |||
Dimension
(W×D×H) |
Internal (mm / inch)
|
750×650×650 / 29.5×25.6×25.6
|
750×880×1160 / 29.5×34.6×45.7
| |
External (mm / inch)
|
1130×985×1520 / 44.5×38.8×59.8
|
1220×1215×1965 / 48×47.8×77.4
| ||
Net Weight (kg / lbs)
|
280±10 / 617±22
|
400±10 / 882±22
| ||
Electrical Requirements
|
AC230V, 1ph, 50Hz
|
14.7 A
|
23.5 A
| |
Cat.No.
|
AAHC1002K
|
AAHC1012K
| ||
1) All specifications are under ambient temperature 20℃ (68oF), No load.
2) Technical data according to DIN 12880, IEC 60068.
3) The value is measured on the center of chamber at the point of vertical direction.
4) Up to 98% of the set value.
2) Technical data according to DIN 12880, IEC 60068.
3) The value is measured on the center of chamber at the point of vertical direction.
4) Up to 98% of the set value.
- Tủ môi trường nhiệt độ, độ ẩm 760 lít; Model: TH-ICH-800; Code: AAHC1012K
- Phụ kiện tiêu chuẩn
- Tài liệu hướng dẫn sử dụng tiếng Anh + tiếng Việt
Không có nhận xét nào:
Đăng nhận xét